VONROC SP508AC Submersible pump 6000 l/h

Had a leak? Pump the water away with this submersible pump up to 1mm (wipe dry)

Strong and reliable submersible pump from VONROC for performing various pumping activities. This submersible pump is flat suction to a water level of 1mm (wipe dry) in continuous mode. Ideal for use in basements and basements where you want to pump the water away wipe dry. Furthermore, the submersible pump is suitable for pumping clean water from cellars, basements, swimming pools, garages, reservoirs and rain pits. This model has a sensor switch and a pump capacity of 6000 liters per hour and is suitable for clean water.

Key benefits of the submersible pump

• Flat suction to a water level of 1mm (wipe dry) in continuous mode.
• The pump is equipped with a sensor switch (2 contact points/sensors), so the pump switches on/off automatically at the desired level.
• Due to the 5 equal positions of the sensor switch, the pump can be set to 4 different on/off levels and to continuous mode.
• Thanks to the sensor switch, there is only 30mm difference between the on and off height in each position. With traditional pumps with float switch, this difference is often much greater.
• Ideal pump for applications where there is no room for a separate float switch.
• Equipped with water drain with built-in check valve. This ensures that the water does not flow back when switched off, which prevents the pump from switching on/off each time.
• This pump has a pump capacity of 6000 liters of dirt and clean water per hour and can process dirt particles up to a maximum grain size of 1mm.
• Suitable for water up to 7 meters deep.
• The pump has a maximum capacity of 6 m³/hour and a maximum delivery height of 7 meters.

Tips for using the submersible pump

• Check the operation of the float switch regularly (e.g. every 3 months) and clean the pump housing if necessary.
• Recommended inner diameter hose is 38mm.
• It is not recommended to lower the pump using the power cable. We recommend attaching a sturdy piece of rope or chain to the handle to lower the pump into the water.
• This pump is not intended to be used without interruption (e.g. as a circulation pump for a swimming pool or pond) or for fixed installations (e.g. as a pump for a fountain).
• When pumping deep water, we recommend first placing a stone or something similar on the bottom and placing the pump on it.
• This type of pump is intended to pump large quantities of water under low pressure (for example, emptying a cellar or swimming pool). Due to the low pressure, this type of pump is not suitable for irrigation applications. The pressure is too low for a powerful jet from a sprinkler or nozzle. Irrigation pumps / garden pumps are suitable for this.

Technical specifications

• Power: 400W
• Voltage: 230 VAC/50Hz
• capacity: 6 m³/hour
• pressure: 0.7 bar
• delivery height: 7m
• depth: 7m
• grain size dirt particles: 1mm
• residual water height: 1mm
• Fixation sensor switch: fixation sensor switch 4 positions and continuous operation
• Switch-on height (automatic operation):
• Position 1: 155mm
• Position 2: 125mm
• Position 3: 95mm
• Position 4: 65mm
• Switch-off height (automatic operation):
• Position 1: 125mm
• Position 2: 95mm
• Position 3: 65mm
• Position 4: 35mm
• Difference between switch-on height and switch-off height: 30mm
• water temperature: 35°C
• Protection degree: IPX8 (protected against water ingress)
• Built-in thermal protection motor: yes
• Connection drain hose: 25mm, 38mm, G1” external thread
• Connection direct: G1 ½” internal thread
• Cable length: 10m
• Rubber cable: yes
• Weight: 3.7kg

*The integrated backflow check valve prevents the backflow of water at the end of the pumping process.

What's in the environmentally friendly packaging?

The VONROC SP508AC submersible pump for clean and lightly contaminated water is supplied in an environmentally friendly box without full colour printing.

Content :

• 1x Submersible pump with sensor switch – SP508AC
• 1x Hose connection with check valve