VONROC SP507AC Submersible pump 14000 l/h

Pump large quantities of water away with the VONROC submersible pump for dirty water

Strong and reliable submersible pump from VONROC for performing various pumping activities. Equipped with an integrated float switch, ideal for applications where there is no room for a separate float switch. In addition, the integrated float switches on earlier than a separate float. The water pump is suitable for pumping polluted and clean water from ponds, cellars, small swimming pools, garages, basements, reservoirs, rain barrels and rain pits. Polluted water means water that is slightly cloudy due to solid particles. This water pump is not suitable for water that is polluted by larger solid parts (such as sewage).

Key benefits of the submersible pump

• Equipped with an integrated float switch.
• With the function switch you can easily switch between manual and automatic (float switch) mode.
• Thanks to the integrated float, the switch-on height is 23cm. For submersible pumps with a separate float, this number is usually higher.
• This pump has a pump capacity of 14000 liters of dirty and clean water per hour and can process dirt particles up to a maximum grain size of 25mm.
• Suitable for water up to 7 meters deep.
• The pump is equipped with a float, so the pump automatically switches on/off at the desired level.
• The pump has a maximum capacity of 14 m³/hour and a maximum delivery head of 7.5 meters.
• The pump leaves approximately 5cm of residual water behind during manual operation.
• The pump requires little maintenance.

Tips for using the submersible pump

• Regularly check (e.g. every 3 months) the operation of the float switch and clean the pump housing if necessary.
• Recommended inner diameter of hose is 32mm.
• It is not recommended to lower the pump using the power cable. We recommend attaching a sturdy piece of rope or chain to the handle to lower the pump into the water.
• This pump is not intended to be used without interruption (e.g. as a circulation pump for a swimming pool or pond) or for permanent installations (e.g. as a pump for a fountain).
• When pumping deep water, we recommend first placing a stone or something similar on the bottom and placing the pump on top of it.
• This type of pump is intended to pump large quantities of water under low pressure (for example, emptying a cellar or swimming pool). Due to the low pressure, this type of pump is not suitable for use in irrigation applications. The pressure is too low for a powerful jet from a sprinkler or nozzle. Irrigation pumps / garden pumps are suitable for this.

Technical specifications

• Power: 750W
• Float switch: yes, integrated
• Voltage: 230 VAC/50Hz
• capacity: 14 m³/hour
• pressure: 0.75 bar
• delivery height: 7.5m
• depth: 7m
• grain size dirt particles: 25mm
• residual water height: 5cm
• Switch-on height float switch: 23cm*
• Switch-off height float switch: 6.5cm*
• water temperature: 35°C
• Protection degree: IPX8 (protected against water penetration)
• Built-in thermal protection motor: yes
• Connection drain hose (pressure connection): 25mm, 32mm, G1” external thread
• Connection direct: G1 ½” internal thread
• Cable length: 10m
• Rubber cable: yes
• Weight: 4,75 kg

* The switching height may vary depending on the position of the float switch.

What's in the environmentally friendly packaging?

The VONROC SP507AC submersible pump for lightly polluted and clean water is supplied in an environmentally friendly box without full color printing.

Content :

• 1x Submersible pump for lightly polluted and clean water – SP507AC
• 1x Hose connection