VONROC SP501AC Submersible pump 6500 l/h

Pump large quantities of water away with the VONROC submersible pump

Strong and reliable submersible pump from VONROC for performing various pumping activities. The water pump is suitable for pumping clean and lightly contaminated water from cellars, small swimming pools, garages, basements and reservoirs. This model has a pump capacity of 6500 liters per hour and can process dirt particles up to a maximum grain size of 5mm. The submersible pump with float is suitable for water up to 7 meters deep.

Key benefits of the submersible pump

• The pump leaves approximately 5mm of residual water behind during manual operation.
• Suitable for pumping clean and lightly contaminated water with dirt particles up to a maximum grain size of 5mm.
• The pump is equipped with a float, which automatically switches the pump on/off at the desired level.
• The pump has a maximum capacity of 6.5 m³/hour and a maximum delivery head of 6 meters.
• The pump requires little maintenance.

Tips for using the submersible pump

• Regularly check (e.g. every 3 months) the operation of the float switch and clean the pump housing if necessary.
• Recommended inner diameter of hose is 32mm.
• It is not recommended to lower the pump using the power cable. We recommend attaching a sturdy piece of rope or chain to the handle to lower the pump into the water.
• This pump is not intended to be used without interruption (e.g. as a circulation pump for a swimming pool or pond) or for permanent installations (e.g. as a pump for a fountain).
• When pumping deep water, we recommend first placing a stone or something similar on the bottom and placing the pump on top of it.
• This type of pump is intended for pumping large quantities of water under low pressure (for example, emptying a cellar or swimming pool). Due to the low pressure, this type of pump is not suitable for irrigation applications. The pressure is too low for a powerful jet from a sprinkler or nozzle. Irrigation pumps / garden pumps are suitable for this.

Good to know

Need a submersible pump for dirty and clean water? Then check out the VONROC SP502AC Submersible Pump 400W – 8000l/h | For dirty and clean water .

Technical specifications

• Power: 300W
• Voltage: 230 VAC/50Hz
• capacity: 6,5 m³/hour
• pressure: 0.6 bar
• delivery height: 6m
• depth: 7m
• grain size dirt particles: 5mm
• residual water height: 5mm
• Float switch: yes
• Float switch switch-on height: 50cm*
• Float switch switch-off height: 5cm*
• water temperature: 35°C
• Protection degree: IPX8 (protected against water penetration)
• Built-in thermal motor protection: yes
• Connection drain hose: 25mm, 32mm, G1” external thread
• Connection direct: G 1¼" internal thread
• Cable length: 10m
• Rubber cable: yes
• Weight: 3.22kg

* The switching height may vary depending on the position of the float switch.

What's in the environmentally friendly packaging?

The VONROC SP501AC submersible pump for clean and lightly contaminated water is supplied in an environmentally friendly box without full colour printing.

Content :

• 1x Submersible pump for clean water – SP501AC
• 1x Hose connection