VANTRUE E1 Pro Cloud 4K Wifi GPS Dashcam

The Vantrue E1 Pro is Vantrue's smallest Cloud dashcam. Connect it with the optional LTE module to connect to your camera anywhere in the world. It films in very sharp 4K resolution thanks to the Sony Starvis IMX678 image sensor and with PlatePix technology, license plates are always recognizable in the footage.

4K with HDR

This Vantrue E1 Pro records in very sharp 2K QuadHD 2592*1944p at 25fps. You can also lower the resolution to 2560*1440p. Thanks to HDR (High Dynamic Range), the contrast of the recordings is very good, and the surroundings are recognizable even in the dark.

Vantrue Cloud

Perhaps the best feature of this Vantrue E1 Pro is the ability to connect to the dashcam from anywhere in the world. The Vantrue LTE module (see accessories) supports SIM cards with an active internet connection. Connect the Vantrue LTE module to the dashcam, and you'll have full Cloud connectivity anywhere in the world.

Vantrue Cloud offers you 2GB of free Cloud storage for all parking mode videos. When the Cloud storage is full, the oldest footage will automatically be overwritten by new footage. For special events (heavy vibrations), a notification will also be sent to your phone, and the video will be securely stored in the Cloud so it cannot be automatically deleted.

1.5 inch LCD screen

The Vantrue E1 Pro is equipped with a small 1.5-inch LCD screen where recordings are visible and you can easily operate the menu. The screen has a screensaver that activates after 1 minute so it doesn't bother you while driving. You can also turn the screen on and off with the voice commands 'Turn on screen' and 'Turn off screen'.

Wireless 5.0GHz Wifi

You can easily view the recorded videos on your smartphone via the Vantrue App for iOS or Android within range of the dashcam (+/- 5 meters). The videos can be viewed live, and you can download recorded videos to your phone so you can share them immediately. Thanks to the fast 5GHz connection, downloading the footage is very quick.

GPS

The Vantrue E1 Pro is equipped with GPS so that the current speed and coordinates are tracked. The speed can optionally be displayed at the bottom of each video, and the recording location and route can be viewed later via the App.

Voice control

The Vantrue E1 Pro offers you the ability to control the dashcam via (English) voice commands. By using commands such as 'Make picture', 'Turn off screen', 'Turn on audio', and 'Lock the video', you can use the dashcam safely while driving and won't miss any incidents.

Automatic buffered parking mode

Vantrue offers the option to secure your car while parking. Connect your Vantrue dashcam with the OBD or 3-wire hardwire kit to power the dashcam even when the car is turned off. The power supply sends a signal to the dashcam as soon as you turn off the car, so parking mode is automatically activated.

Parking mode only works in combination with the OBD or 3-wire hardwire kit. This power supply has a protection that interrupts the power at a certain voltage so you don't end up with a dead battery.

Vantrue has four recording modes during parking:

Motion detection : Motion detection (with adjustable sensitivity) where the dashcam is on standby until visual motion is detected in the image. Then, 5 seconds before and 30 seconds after the incident are recorded.

Collision detection : Vibration detection (with adjustable sensitivity) where the dashcam turns off until a vibration is detected. Then the dashcam turns on, records for 1 minute, and then turns off again.

Low bitrate recording : Continuous recording in lower quality (720p or 1080p at 15fps) to save space on the SD card. As soon as a vibration is detected, a normal 1-minute recording is started.

Time lapse recording : Continuous recording at 1fps, 5fps, 10fps, or 15fps to save space on the SD card. At 1fps, a period of 30 minutes is played back in 1 minute. As soon as a vibration is detected, a normal 1-minute recording is started.

158˚ viewing angle

The Vantrue E1 Pro has a wide viewing angle of 158 degrees, capturing a very large area around the car.

Magnetic GPS mount

The Vantrue E1 Pro is attached to the windshield with a convenient self-adhesive GPS mount with a magnetic connection. The dashcam can be clicked in and out of this mount in one motion. To use your Vantrue E1 Pro in multiple cars, an extra GPS mount is available (see accessories).

Optional CPL filter

Attach the optional CPL (Polaroid) filter to your Vantrue dashcam to prevent annoying reflections from the dashboard or interior. The filter can be attached to the dashcam in an instant and is easily adjustable by rotating it.

Optional Bluetooth SOS button

The Vantrue E1 Pro can be expanded with a handy Bluetooth SOS button. You can place this button anywhere in the car, and with one press, you can take a photo and secure video or turn the dashcam's microphone on and off.

G-sensor

The Vantrue E1 Pro has a built-in G-sensor. This sensor detects vibrations in the event of a collision. The current video is then securely saved.

Loop recording

The Vantrue E1 Pro is equipped with loop recording, which automatically overwrites the oldest footage with new footage. The videos are saved in shorter segments of 5 minutes, and as soon as the SD card is full, the oldest segment is deleted.

Secure recordings (manually selected or detected by the G-sensor) are saved in a separate folder and are not deleted by loop recording. This way, you always have access to the latest and most important videos.

512GB support

Vantrue is one of the few dashcam brands supporting SD cards up to 512GB. With 512GB, you can store up to 108 hours (over 4 days) of FullHD video. At a higher resolution, the total recording time will be shorter.