INF YET026-2pack Hand transmitter

Code cloner for an extra remote control:

RF code cloner in remote control design to clone your old remote control codes. Perfect for transferring/copying the code for garage doors, automatic gates, security systems, and home appliances.

Always have a spare on hand:

copy the functions of your original remote control with this 4-channel RF duplicator with learning functions. This way, you always have a spare or extra garage door opener on hand.

Ideal for garage doors:

compatible with a fixed frequency of 433 MHz. This is the frequency that most garage door openers use.

Compatible with the following chipsets:

2260 (all manufacturers) 2262 (all manufacturers) PT2264, 5326 (all manufacturers) SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) 1527 (all manufacturers) 2240 (all manufacturers) HCS101, HCS200 \ HCS201 (parts of the code) HCS300 \ HCS301 (parts of the code) Singlechip parts.

NOTE: This model is not suitable for rolling code. In that case, you need to purchase a different model. The car alarm box cannot be copied (for security reasons).

Specification:

Signal transmission rate: 50-60 kHz
Voltage: 12 V
Current: 10 mA
Frequency: 433 MHz
Signal transmission power: 10-12 mW
Signal transmission distance: Up to 50 m in open space
Color: Black/silver
Battery: 2V27A battery (included)
Dimension: 6x4x1.2cm
Weight: 28 g

The package contains:

Universal code cloner - remote control

How to copy:

Step 1: Clear the old code from the duplicator

1. Press and hold buttons A and B continuously until the LED flashes

2. Release button B (keep button A pressed) and slowly press button B 3 times, the LED will flash

3. Release button A, clearing the code is complete

Step 2: Copy the code from the original transmitter

1. Place the duplicator as close as possible to the original transmitter.

2. Press and hold button A on the original transmitter and press and hold button A on the duplicator until you see the LED of the duplicator flash.

3. Release both buttons to complete the code copy. Copy the next button in the same way.

Reset function:

Press and hold buttons C and D for 3 seconds, the LED will flash and all buttons will revert to the last copied codes.