ICH-ZAPFE Home tap JET 30 1-line, 35 liters/h - flow cooler Beer tap

Beer tap, Home tap, Beer cooler, Dry cooler - JET 30, 1-tap, 35 liters/hour

PDF product information about the JET 30 dispensing system can be found here

Beer tap JET 30, 35 liters/h,
Beer keg, flow cooler, dry cooler

3 minutes unpacking...2 minutes setup...1 minute connection = infinite
Enjoy a cold, clear, freshly tapped drink - you deserve it!
The jet 30 beer cooler is intended for professional cooling and serving of excellently chilled beer at home, at garden parties, and for small commercial use.

• Control range
  +2 to +10 degrees
• Performance:
  35 l/h at 10°C TD
• Cooling technology
  is 45% more efficient
• Ready for use
  in just 2-4 minutes

When the thermostat is set to max, the thermoblock will accumulate a large amount of energy (after approx. 10 minutes), making it possible to serve several chilled beers in a row.
The cooling technology of the JET 30 dispensing system is about 45% more efficient than the electricity consumption.
The beer is cooled right up to the tap.
The cooling loops are made of stainless steel and are therefore stable and durable.

The materials used meet the highest hygiene standards and ensure that the cooler has a long lifespan.

JET 30 - strong and fast like a jet

With its strong cooling performance and perfect dimensions, the JET 30 dispenser is one of the leading table/under-counter coolers on the market.

Cooling capacity of 40 to 60 glasses (0.5 liters) of excellently chilled beer per hour,

The powerful JET 30 compressor ensures minimal energy consumption and excellently chilled beer without foaming

Continuous flow cooler JET 30 - efficiency, performance, enjoyment

The thermoblock of the JET 30 beer tap has a high energy capacity, allowing a perfectly chilled beer to be tapped after just 2-4 minutes.

When the thermostat is set to max, the thermoblock will accumulate a large amount of energy (after approx. 10 minutes), allowing several chilled beers to be served in a row.

The cooling technology of the JET 30 dispensing system is about 45% more efficient than the electricity consumption.

The beer is cooled right up to the tap. >

The cooling loops are made of stainless steel and are therefore stable and durable

JET 30 flow cooler - technical data

The noble JET 30 dry cooler, weighing only 14.5 kg, is equipped with a 7 mm cable.
High quality of workmanship and packaging

• Dimensions: W/D/H/ 167/281 / (incl. Drip tray) /368 mm
• Voltage: 230V, 50 Hz, 267W, 1.16A
• Compressor: 1/ 8 HP
• Line: 1 x beer
• Housing: Metal, powder-coated, stainless steel

JET 30 - Top in its class

The JET 30 beer cooler is one of the best in the “dispensing systems up to 35 l/h” category in terms of cost,
performance, and quality ratio.

Easy cleaning of the JET 30 system

With the following cleaning sets, you can easily and conveniently clean the JET 30 dispensing system after use:

Small cleaning set

Easy cleaning set (recommended)

Large cleaning set

Beer cooler JET 30 - easy to use - TOP in performance

You can tap in just a few steps:

Unpack the dispensing system

Connect the pressure reducer to the CO2 cylinder and tighten the cylinder with the carbon dioxide wrench.

Connect the CO2 hose from the pressure reducer to the tap head.

Connect the beer hose to the tap head, insert it into the dispensing system, and secure it.

Tap the keg

Adjust the tap pressure on the pressure reducer

Connect the dispensing system to the power outlet

Adjust the pressure and enjoy cold beer

All components can be found in the complete set or as accessories in our shop