VONYX WM82B microphone set Black

Hands free and the ability to walk around, that's what the Vonyx WM82 wireless microphone system can offer. The system consists of a 2-channel receiver, two bodypacks, two headsets and 2 tie-pin microphones. Because both bodypacks work on a fixed frequency, nothing needs to be programmed, the connection to the receiver is made immediately. After connecting to a sound system, this set is therefore immediately ready for use. The receiver of this set has 2 displays on which the frequency can be read. Also, on the receiver the volume of both microphones can be controlled separately. On the back of the receiver there are two XLR connections (balanced) with which the signal of both microphones can be sent separately to a mixer. The 6.3mm Jack output is a mix of both microphones and allows the entire set to be connected to just one microphone input. Both bodypacks (transmitters) are equipped with a clip that makes it easy to hang them on a waistband, for example. The included headsets and tie-pin microphones can be connected to the bodypacks so that this set can be used for many situations. The WM82 is therefore suitable for speeches, lectures, sports instruction, entertainment, etc. Features WM82 wireless microphone set - UHF receiver and two UHF bodypacks - Receiver with dual blue displays - Volume control per microphone - Bodypacks with blue frequency display - 2x balanced XLR outputs and a single mix unbalanced 6.3mm output - Supplied in a robust plastic case - Including 6.3mm jack cable - Frequency: 863.100MHz & 864.500MHz - RF output: <10mW - Dynamic range: >85dB - Frequency range: 30Hz - 20kHz - THD: <0.5% - Signal to noise ratio: >96dB - Battery: 2x AA (Penlite) per bodypack - Connection voltage: 230Vac/50Hz - Dimensions: * Receiver: 176 x 130 x 42mm * Per bodypack: 115 x 65 x 20mm - Weight: * Receiver: 700gr * Per bodypack: 200gr The Vonyx WM82B can and may be used throughout Europe legally and without a license.