ACT M.2 NVMe/PCIe dual SSD docking clone station, USB-C 3.2 Gen2 Docking Station

The AC1502 M.2 Dual SSD Clone Station is the ideal solution for offline data cloning. This USB-C 3.2 Gen2 docking clone station is suitable for two M.2 NVMe/PCIe SSDs with M-key and B+M-key. Even SSDs with heatsinks are supported. Clone an SSD without computer intervention. Place the SSDs in the dock and connect the power adapter. The clone status is shown by the LEDs. When the AC1502 is connected to a computer with two SSDs, it is easy to access both drives and make a backup with a maximum transfer speed of up to 10Gbps.

Supports M.2 NVMe/PCIe SSDs with and without heatsink
The AC1502 is designed to connect up to two M.2 NVMe/PCIe SSDs to a computer or laptop. The dock is suitable for M-key and B+M-key. SSDs with heatsinks are supported.

Offline cloning without using a computer
Use the Dual SSD Clone Station to clone one SSD to another SSD without computer intervention. Offline cloning is done with the AC1502. Place a source and target SSD in the docking station. Connect the power adapter, turn on the docking station, and press the clone button. Make sure that the disk size of the target SSD is equal to or larger than the source SSD.

Upgrade the laptop's SSD
Increase the capacity of a laptop? Use the AC1502 to create a clone of the laptop's current SSD to an SSD with a larger capacity.

Clone status indicator
The LED indicators (25%/50%/75%/100%) on the AC1502 show the progress of cloning. When the 50% LED is flashing, the dock is cloning data between 25% and 50%. Is the 50% LED lit? Then 50% of the data has been transferred.

Access external storage
Connect two M.2 NVMe/PCIe SSDs to a computer or laptop with the AC1502 and access the data on these solid-state drives. These two external SSDs can be used for external storage. USB 3.2 Gen2 10Gbps and UASP (USB Attached SCSI Protocol) ensure fast data transfer.