KEEPOWER Keeppower 26650 Li-Ion batterij 5500 mAh, 3,6 V - Battery

The Li-ion battery 26650 with 5500 mAh capacity, 3.6 V - 3.7 V Li-ion battery and PCB protected, dimensions 69.9 x 26.5 mm must be observed
The high-quality cell with long life and high cycle stability. Directly integrated: protection PCB protection with short circuit, overload and deep discharge. Developed for LED flashlights, LED and battery carriers.

• Keeppower 26650 PCB with lithium-ion battery protected
• Capacity max. 5500mAh, Min. Capacity 5400mAh
• Rated voltage 3.6 to 3.7 volts,
• Charging voltage 4.2 ± 0.05 V, Discharge voltage 2.75V
• with the slightly higher plus pole raises the button at the top
• Discharge current (continuous load) max. 10A, system chemistry LiMgCo
• Protection circuit PCB yes 10A, charging method CC-CV
• Dimensions diameter 26.50 mm ± 0.15 mm, height 69.9 mm ± 0.25 mm
• Weight only 93.49 grams

Scope of delivery: 1 piece Keeppower 26650 - 5500 mAh, 3.6 V - 3.7 V Li-ion battery PCB-protected Safety instruction: please note that removing or damaging the protective electronics (PCB) may cause short circuit, fire or explosion.
Further features: Lithium-ion for short Li-ion batteries are thermally stable and have no memory effect.

specifications Charging current normal: 2000mA / 4h Fast charging current: 3500 mA / 3.5 h Operating temperature charging approx. 0 ° C - 45 ° C Operating temperature discharge approx. -20 ° C - 60 ° C

Notes:
A special charger is required to charge lithium-ion batteries, which charges the batteries through a special charging process. (CCCV = constant current, constant voltage.) This battery should not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge batteries only to about 4.1 volts, as this significantly increases the life or number of charge cycles (possibly up to double). Only appropriate and suitable lithium-ion chargers should be used for charging. However, cheap chargers sometimes have the disadvantage that they do not safely switch off after the end of the charging process, but instead continue to charge the batteries with a small charging current, which can be dangerous.