FIAMM Batterij geschikt voor APC RBC1-batterij, APC Back Battery

Battery suitable for APC RBC1 battery, APC Back-UPS, model BK200BI

• Replacement battery consisting of 2x 6.0 volt 4,5 Ah lead-acid batteries (= 12 volts)
• Replacement battery suitable for battery APC RBC1 battery
• APC Back-UPS, model BK200BI
• Important note: the kit comes without the cable connectors, so you can reuse the cables from the old battery pack

Fiamm FG10451 type connection battery: Faston 4.8 mm screw contacts

The highly absorbent microporous separator of the maintenance-free FG lead-acid battery
binds a maximum amount of pure electrolyte and permanently isolates the electrodes
from each other. This means that the battery can be turned upside down in any position
working without loss of capacity. The electrodes consist of a
special antimony-free lead alloy. This results in a very low
Self-discharge rate of less than 3% per month. The rugged casing material is
an impact- and fracture-resistant, corrosion- and aging-resistant ABS
Plastic. FG lead-acid batteries are safe for deep charging, which can also
Charge deep discharge. In short, however, must be recharged immediately after a
Discharge can occur. Accumulators of the same capacity can
be connected in series and parallel without dividing the charge
however, they should always come from the same batch. - Fully rechargeable
maintenance-free, - independent operating condition, - fleece technology (AGM technology), - low
Self-discharge <0.1% / 24 hours at 20 ° C, - high temperature range - 30 ° C to + 50 °
C, preferably + 10 ° C to + 30 ° C, - high current types and cycle resistant
Available versions, - high power density, long service life at 20 ° C
more than 5 years. suitable for Mellert TL232 and TL231 hand lamps

specifications:

System: PB lead battery, voltage: 6.0 volts , capacity: 4500 mAh ( 4.5 Ah )
Dimensions (LxWxH): 70x48x102mm, weight: 890gramm